Hai Yue X-330 refueling a key chain automatic refueling machine can automatically timed refueling. The machine can be divided into: two hosts and injector seat. Between the transparent tubing connected to the injector seat change with applicable; hand according to transparent tubing oil can also be a convenient view to the oil situation. Automatic injection machine, spraying line dedicated for various chains on refueling. First, the first tanker mounted on rails above, and then in front of the tanker oil port at about 30CM aligned vertical wheel to open a gap size of attachments for mounting accessories】 【proximity switches, (Note: The proximity switches must rely on the most side installation for sensing the vertical chain wheel) Second, the tanker out of a total of three ports were installed as follows: 1, starting from the right side of a vertical wheel mounted in the oil port aligned on the right (must be aligned perpendicular to the wheel bearing installation) 2, an intermediate oil outlet were installed in the chain above water assessment aligned with the wheel (bearing mounted water assessment must be aligned wheels) 3, the left one of the ports were installed in the vertical alignment of the left wheel (the Wheel bearings must be aligned vertically installed) 4, please note: Be sure to use a good level spacing and vertical wheel when the wheel is installed. Chain 150, the interval distance 7.5CM; chain 200, the interval distance 10CM; chain 250, the separation distance is 12.5CM. Third, the boot time is set to the current time, and then set the snooze time (2-72 hours, adjustable) assumption: the need to work once it can be set to 24 hours a day, and finally set the working time (1 -3.5 hours adjustable)